Black Screen after RGB Mode [Solved]

dow696 (Sebastian) 2016-10-28 14:50:27 UTC #1

Hi Guys, I have a little Problem. After putting Arduventure on my brand new Arduboy there was no way to upload another sketch so I turned on in RGB Mode. It worked perfect and I was able to upload the new sketch. After a few minutes (no clue what happen) the screen turns black and is still not coming back. Reset doesnt work and the RGB Mode did not response (no LED, no screen).

Thanks for help!

dow696 (Sebastian) 2016-10-28 15:42:48 UTC #2

I fixed the problem. After much tries of reset i got it. Setting the Arduboy on reset is just unbelievable hard

Cody17 (Cody) 2016-11-06 23:46:47 UTC #3

Work and work and all will work again