First IMAGE - a very small demo for people to show their first image

As a member of TEAM a.r.g. this is our eighth demo.

You’re free to contribute and make the demo bigger, better, showing what can be done with Arduboy

it has only 1 purpose: make it easy for people to copy paste a converted image code in a template, so it can be shown on the screen of the arduboy.

@fuopy made an online converter you could use

  • press the “Download ZIP” button on the right side on the github page
  • unzip it
  • remove the “-master” out of the folders name
  • double click on the firstIMAGE.ino file and arduino IDE should open the file.
  • the image code is in the bitmaps.h “tab”
  • replace all the data between the { }; with your own
  • change the height and width on the firstIMAGE.ino “tab” arduboy.drawBitmap(0, 8, TEAMarg, 128, 48, WHITE);

TEAMarg Demo webpage:



From now on, this demo works for both ARDUBOY and DEVKIT.

You can use the board.txt way to set you desired device (or change it in Arglib.h)
Default is ARDUBOY

1 Like