[Poll] New Arduboy: B&W or Color Screen?

I’ve also been searching for a while based on OLED panel, but decided to start searching based on driver IC instead. So the SSD1327 fits nicely 128x128px 4bit gray: http://www.solomon-systech.com/en/product/advanced-display/oled-display-driver-ic/ssd1327/
It’s currently in use by Seeed to drive a 96x96px panel: https://seeeddoc.github.io/Grove-OLED_Display_1.12inch/
Can Seeed hook you up?
I think the extra bit depth allows much more information to be presented with so few pixels (e.g. Gameboy allows background art to be visually distinct from character graphics / foreground).

3 Likes

I’ve actually grown to love the black and white. Gray scale would be nice, but honestly having more processing power and more space to store graphics could mean very beautiful games. I suppose we could always make black and white games with a color screen, or gray scale for that matter with different graphics libraries.

Yeah I could get that 96x96 but I don’t want to reduce the pixel width. It’s also quite small.

1 Like

The nice thing about grayscale is that black and white sources can be used if space and design make sense for it, without getting into issues of color artifacts. But if the shading works for what you are doing, then it is there to take advantage of. I also think that there is enough processing power available to use a library of 1 bit imagery, but use real time processing to enhance it to 4 bits - thinks like adding shadows, for example.

Square display also adds some interesting control options with the device rotated, even while the API interface only needs a rotation parameter to control which direction you want to see.Might even be some interesting game designs that require you to rotate the device to get a difference perspective, while you are playing.

2 Likes

Oh, yeah! The DS and even PSP have games that take advantage of this.

I’ve got nothing against square display, but it’s not a great idea to reduce the resolution.

The 128x128 pixel displays work great for this. But if we are gonna go that route, I just assume do the color screen. So anyways, sticking with the same screen for the next revision Arduboy Zero. That way all the current games are a direct port and could be included on the SD card!

100 in 1 open source game system!

3 Likes

So for the next version, what other features are being considered? I would like to see an integrated SD slot (micro or otherwise), and perhaps some sort of SPI port allowing access to not only the SPI but 3.3v, 5v GND and one or two pins to use as slave select, so that people can easily create add-on devices such as external controllers, gameboy printer adapters etc.

Rather than going off topic in this thread, it would probably be better to continue with these kind of questions in a topic that’s more suitable
http://community.arduboy.com/t/arduboy-2-my-ultimate-hardware-wishlist/282/1

1 Like

Here’s a question. As then next Arduboy will be using the same screen, would a front-light but possible? Using the RGB LED to influence the colour of the while LED screen?

Don’t you mean backlight?

If the screen is LED or OLED then it has its own inbuilt illumination. Any external illumination won’t make any difference.

Personally, although colour would be cool, it would make the ArduBoy pretty much the same as lots of other handheld game machines. By keeping it restricted it makes it more challenging to developers and better for educating people.

I would like to see a higher resolution Black and White display but with the introduction of some grey. Just 1 or 2 shades of grey would make all the difference to the possibilities.

Nope, front light, so the coloured light would reflect onto the screen, making the while pixels a slightly different colour.

It’s still a backlight, it’s called backlight negative evidentally.

Here’s where I am with all this.

A color screen would look nice but it would make it look like any other handheld console. I think a b&w screen is the way to go. It makes the Arduboy unique.

1 Like

It would really be a colour b&w screen, only 1 colour possible at a time.
Also, apparently a different screen is not an option.

As far as lighting, I’m thinking of trying to use the case as a light pipe. The current case happens kind of naturally but the LED isn’t intentionally fed into it. I’d actually like to put more than one, depending on the number of IO available too. If I could use 4 side emitting LED like on this strip that might be best!

Do they make color screens the same size as the current screen I’ve been looking with no luck

there’s an 0.96 inch version now with the SSD1327 that has the original 128x64 pixels resolution :slight_smile: (also sorry for the late reply on a seemingly hurtful topic)

https://www.aliexpress.com/item/SSD1327OLED/32834679578.html

Now that I am a wee bit wiser, I agree with many more n this post who remind that color takes up a ton more space in the code